BOSS Audio Systems CH10DVC 1500 Watt, 10 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

BOSS Audio Systems CH10DVC 1500 Watt, 10 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

    Features:

  • Sensitivity SPL (1W / 1m) 84 dB, Resonant Frequency 38 Hz
  • Polypropylene Cone, 2 Inch Voice Coil, Rubber Surround
  • Sealed Enclosure Internal Volume: .8 Cubic Feet, Ported Enclosure Internal Volume: 1.4 Cubic Feet
  • 3 Inch Round Inch Port Circumference, 13 Inch Port Length, 32 Hz Port Frequency
  • 4.6 Inch Mounting Height, 9.3 Inch Mounting Hole Diameter
  • Dimensions: Depth 11” x Width 11” x Height 4.8”
  • 3 Year Platinum Online Dealer Warranty

BOSS Audio Systems BASS10 Amplified Car Subwoofer – Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control

BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control

    Features:

  • Space Saver – If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
  • Pulse Width Modulated – PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Inputs – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Specs – Dimensions: 14” x 12.3” x 3.3”, Weight: 11.35 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone
  • Warranty – BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

BOSS Audio Systems BAB10 Amplified Car Subwoofer – 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

BOSS Audio Systems BAB10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

    Features:

  • BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
  • PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • DIMENSIONS: 14 inches in Depth, 12. 3 inches in Width and 3. 3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
  • : BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

BOSS Audio Systems AR100DVC 10 Inch Car Subwoofer – 1400 Watts Maximum Power, Dual 4 Ohm Voice Coil, Sold Individually

BOSS Audio Systems AR100DVC 10 Inch Car Subwoofer - 1400 Watts Maximum Power, Dual 4 Ohm Voice Coil, Sold Individually

    Features:

  • Cone – Made from Polypropylene, the AR100DVC 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
  • Voice Coil – Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
  • Surround – We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear.
  • Basket – A Stamped basket frame is able to absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
  • Specs – Resonant frequency: 36 Hz, Sensitivity SPL (1W/1m): 85 Db, Impedance: 4 Ohms, Port frequency: 38. 2 Hz, Dimensions: 11” x 11” x 5. 4”, Mounting Depth: 4. 8”, Mounting hole: 9. 1”, Weight: 7. 6 Lbs.
  • – BOSS Audio Systems provides a powerful 3-year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

BOSS Audio Systems CXX10 Car Subwoofer – 800 Watts Maximum Power, 10 Inch Subwoofer, Single 4 Ohm Voice Coil, Sold Individually

BOSS Audio Systems CXX10 Car Subwoofer - 800 Watts Maximum Power, 10 Inch Subwoofer, Single 4 Ohm Voice Coil, Sold Individually

    Features:

  • Sensitivity SPL (1W / 1m) 87 dB, Resonant Frequency 36 Hz
  • Polypropylene Cone, High Temperature Voice Coil, Rubber Surround
  • Sealed Enclosure Internal Volume: .65 Cubic Feet, Ported Enclosure Internal Volume: 1 Cubic Feet
  • 3.5 Inch Round Inch Port Circumference, 10 Inch Port Length, 38 Hz Port Frequency
  • 4.6 Inch Mounting Height, 9.2 Inch Mounting Hole Diameter
  • Dimensions: Depth 11” x Width 11” x Height 4”
  • 3 Year Platinum Online Dealer Warranty

BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control

BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control

    Features:

  • Built-in Amplifier – A built-in 600 Max watt amplifier powers the 10” subwoofer
  • Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”
  • Low Level Input – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the CUBE10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Specs – Dimensions: 11.22” x 11.22” x 11.22”, Weight: 18.61 lbs.
  • Warranty – BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

BOSS AUDIO Phantom P106DVC 10″ 4200W DVC Car Subwoofers Power Subs PAIR

BOSS AUDIO Phantom P106DVC 10" 4200W DVC Car Subwoofers Power Subs PAIR

    Features:

  • NEW BOSS P106DVC 10″ 4200 Watt Car Subwoofers (Pair)
  • 2100 Watt MAX (4200 Watt PAIR)
  • 1050 Watt RMS (2100 Watt PAIR)
  • DUAL 4 Ohm Voice Coils
  • Poly Injected Cone

Boss Chaos Exxtreme 10″ 1000W Dual Voice Coil 4 Ohm Car Audio Subwoofer (2 Pack)

Boss Chaos Exxtreme 10" 1000W Dual Voice Coil 4 Ohm Car Audio Subwoofer (2 Pack)

    Features:

  • 10-inch woofer with dual 4-ohm, 2.5-inch voice coil
  • Features 1,000 watts of max power and 500 watts of RMS power
  • 87 dB sensitivity with 36 Hz of resonant frequency
  • Sharp sound with the polypropylene cone and rubber surround
  • Ideal for 0.65 cubic foot sealed or 1 cubic foot ported enclosures

BOSS Audio Systems CXX104DVC Car Subwoofer – 1000 Watts Maximum Power, 10 Inch, Dual 4 Ohm Voice Coil, Sold Individually

BOSS Audio Systems CXX104DVC Car Subwoofer - 1000 Watts Maximum Power, 10 Inch, Dual 4 Ohm Voice Coil, Sold Individually

    Features:

  • Cone – Made from Polypropylene, the CXX104DVC 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
  • Voice Coil – Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
  • Surround – We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, with no wear & tear
  • Basket – A stamped basket can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
  • Specs – Resonant frequency: 42 Hz, Sensitivity SPL (1W/1m): 83 Db, Impedance: 4 Ohms, Port frequency: 20 kHz, Dimensions: 8.5” x 8.5” x 4”, Mounting Depth: 3.4”, Mounting hole: 8.8” x 6”, Weight: 7.2 Lbs.
  • Warranty – BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

BOSS Audio Phantom 10″ 2100W DVC 4-Ohm Deep Bass Car Subwoofer | P106DVC

BOSS Audio Phantom 10" 2100W DVC 4-Ohm Deep Bass Car Subwoofer | P106DVC

    Features:

  • 10 inch 2100 watt car subwoofer
  • 2100 watts max
  • 1050 watts RMS
  • Dual 4 ohm voice coils
  • Poly injected cone

As an Amazon Associate I earn from qualifying purchases.

Random products:

ryobi orbital sanders
ozark trail beach tents